contacts
contacts
where we are
location
twitter dpee
EN
IT

DPEE imports and sells electrical and electronic products for the industry since 1972. In recent years, DPEE extended the range of its interest to the energy market and developed specific products and services for the measurement and the control of the consumption and the production of energy.

In particular, the range of products offered by DPEE includes electrical energy meters for industrial and residential use, reference equipment for laboratories, panel analyzers and multimeters and software solutions for the energy data management.

user area
download software - please login

products

DPEE offers a wide range of products for the survey and the measurement of electrical parameters such as single and three phase energy meters, panel instruments including ammeters, voltmeters, three phase power analyzers, frequency meter, temperature and humidity sensors and power factor correction equipments.
To the measurement laboratories DPEE can provide reference calibrators, power sources and a three-phase fully automated calibration bench. Furthermore, DPEE offers a complete software solution for the remote reading of energy measurement data, available in several versions with different features depending on user needs.
Login
Password
Contact Dpee to have the keys to access the user area
contacts
contacts
DPEE S.r.l.
Corso San Maurizio n. 81 - 10124 TORINO - ITALY
Phone. +39 011 8122247 - +39 011 836851 - Fax +39 011 8179054
e-mail: info@dpee.it
Sede legale:
Via Manzoni 19 - 20121 Milano - C.F. e P.Iva: 01361930157
Iscrizione Tribunale Milano 152427 - C.C.I.A.A. Milano REA sede MI/851-680
Cap. Soc. € 98.000,00 interamente versato
C.C.I.A.A. Torino REA unità locale TO/1126938
Dpee Srl - C.so San Maurizio, 81 - 10124 Torino - ITALY
electrical energy meters
electrical energy meters
TH40C
model: TH40C
download pdf
product detail
The multifunction static energy meters type TH40C are intended to measure the active energy in two flow directions, the reactive energy in four quadrants, the apparent energy, the active and reactive maximum demand in three-phase 3 or 4-wires distribution networks.

The metering features comply with the IEC62052-11, IEC62053-21, IEC62053-22, IEC62053-23, EN50470-1 and EN50470-3 technical norms. The meters are MID certified and manufactured in compliance with ISO9001 standard.

The meter is equipped with two independent serial ports. On the RS485 port the MODBUS protocol is available.

electrical energy meters
electrical energy meters
MK6
model: MK6
download pdf
product detail
The multifunction static energy meters type MK6 are intended to measure the active energy in two flow directions, the reactive energy in four quadrants and in combined quadrants in three-phase 3 or 4-wires distribution networks. The MK6 meter is equipped with a hour counter that allows the measurement of the effective time of energy production in engines and generating sets.

The metering features comply with the IEC62052-11, IEC62053-21, IEC62053-22, IEC62053-23 technical norms.

electrical energy meters
electrical energy meters
MK7-MK10
model: MK7-MK10
download pdf
product detail
The multifunction static energy meters type MK7 and MK10 are intended to measure the active energy in two flow directions respectively in single and three phase networks. The MK10 meter can measure the active energy in four quadrants and combined quadrants.

The metering features comply with the EN50470-1, EN50470-3, IEC62052-11, IEC62053- 21 (MK7 and MK10) and IEC62053-23 (MK10) technical norms. The meters are MID certified.

panel instruments
panel instruments
ADL series
model:ADL series
The meters of the ADL series are designed for measuring the active energy in single- phase (ADL100) and in two and three systems three-phase (ADL300) networks. The meters are static type for mounting on DIN rail, compact and lightweight, built with high quality components to ensure accuracy and reliability. The metering features comply with the IEC62052-11 and IEC62053-21 standards.
strumenti campione
reference standards
model:SNT-3901
The reference standard meter type SNT-3901 has been designed for the calibration of single and three phase meters on the field and it's intended to be used by the measurement laboratories, the R&D departments, the certification institutes etc.

The meter can measure the voltage, the current, the frequency, the active and reactive power, the power factor, the active and reactive energy and the apparent power. Furthermore, it provides the harmonics analysis up to the 51st and visualizes the waveform of each phase as well as the vector diagram of currents and voltages, and is equipped with a function for the energy registration test. The meter is equipped with a large FLASH memory for storing the measurement data, that can be later transferred to a PC with a normal USB pen drive.

strumenti campione
reference standards
model:SNT-103
The power source SNT-103 is a laboratory instrument that can generate active and reactive power with high stability in single and three phase 3 and 4 wire circuits. The operator can control separately voltages, currents, angles and frequency with high resolution.

Furthermore, the device can generate harmonic components up to the 21st. The power source can be controlled either with the embedded keyboard or with a PC software.

strumenti campione
reference standards
campione SNT-3300
model:SNT-3300
The test bench type SNT-3300 allows to perform automatic calibration of single and three phase static and induction energy meters. It exists in two versions, for direct connected or transformer operated meters and can be equipped with 3, 6, 8, 12, 16 o 24 positions. The bench is driven by a PC software that can perform automatically the tests sequence without the intervention of the operator.
strumenti campione
reference standards
campione SNT-503
model:SNT-503
The current and voltage phantom load SNT-503 is designed for both use in the laboratory and in the plants and can generate active and reactive power in single-phase and 3 and 4 wires three-phase circuits with high stability. The user can control each phase voltage, current, frequency and angle with high resolution, and generate harmonics up to the 21th. The management of the device can be done either via the embedded keyboard or through a software that can be installed on a normal PC.
strumenti campione
reference standards
campione SNT-6038
model:SNT-6038
The reference standard meter type SNT-6038 has been designed for the calibration of single and three phase meters and it's intended to be used by the measurement laboratories, the R&D departments, the certification institutes etc.
The meter can measure the voltage, the current, the frequency, the active and reactive power, the power factor, the active and reactive energy and the apparent power. Furthermore, it provides the harmonics analysis up to the 21st and visualizes the waveform of each phase as well as the vector diagram of currents and voltages, and is equipped with a function for the energy registration test. The meter is available with accuracy 0.05% and 0.02%.
strumenti campione
reference standards
campione SNT-683
model:SNT-683
The three phase tester SNT-683 combines in a single portable device a current and voltage phantom load and a reference meter, and can be used for both the tests with phantom and real load.
All the operations can be done via the embedded large touch screen, or using the software that can be installed on a common PC. The device is equipped with all the usual features of the reference meters and of the phantom loads (harmonic generation, visualization of waveforms and vector diagram, verification of the integration of the energy etc.) and allows the user to set a sequence of tests that can be performed automatically without any intervention.
software
software
WinEMTFree
version: WinEMTFree
WinEMTFree is a software for remote reading of TH40C meters. It works through several communication channels, such as modem, Ethernet, direct serial and optical head. With WinEMTFree the user can download the registers, the logbook and the load profiles, export data in various formats, synchronize the meter, see the vector diagram of voltage and current in real time and finally query the meter via Modbus protocol.
software
software
version: WinEMTLite
WinEMTLite is a software for remote reading of TH40C meters. It works through the infrared interface of the meter and requires the optical head that can be ordered separately from the meter. With WinEMTFree the user can download the registers, the logbook and the load profiles and synchronize the meter.
WinEMTLite
software
software
version: WinEMTBase
WinEMTBase is a software designed for remote reading of meters and data loggers from different manufacturers. With WinEMT the user can organize his metering devices in a database, query manually the devices and process the data them in preset reports.
WinEMTBase
software
software
version: WinEMT+
WinEMT+ is a software designed for reading and managing data from different kinds of metering devices (electrical energy meters, data loggers, water meters, gas meters etc.). With WinEMT+ the user can organize his metering devices in a database, schedule and perform automatic download and process the data in reports that are completely configurable to manage simultaneously measures relating to different forms of energy.
WinEMT+
software
software
WinEMTPro is a software designed for reading and managing data from different kinds of metering devices (electrical energy meters, data loggers, water meters, gas meters etc.). With WinEMT+ the user can organize his metering devices in a database, schedule and perform automatic download through different channels at the same time and process the data in reports that are fully configurable to manage functions of any complexity involving measures relating to different forms of energy.
WinEMTPro